[DogParkList] Re: cocoaModem
David Ferrington
2E0XDF at Alphadene.co.uk
Fri Aug 26 07:39:16 EDT 2005
Sounds like a recommendation to me, especially if that's the way Mr Agro
does it - I'm convinced :-)
On same subject then, I have a G4 with audio out & in (headphone/mic
sockets). I see recommendation is to use an iMic, does that still apply when
using SignaLink too?
On 26/8/05 12:03 pm, "Don Agro" <dagro at dogparksoftware.com> sent:
> Hi David,
>
> On 26-Aug-05, at 4:00 AM, David Ferrington wrote:
>
>> On 26/8/05 1:25 am, "dogparklist-request at dogparksoftware.com"
>> <dogparklist-request at dogparksoftware.com> sent:
>>
>> not sure if this or Ham-Mac is best place to ask, but I'll start here.
>> Would have asked developer, but don't email.
>>
>> Just thinking of getting into digital modes and obviously looking at
>> cocoaModem, reading about interface to rig.
>> I have a microHam for my FT-857 and I know from some
>> experimentation with
>> MLDX that I can key PTT via the DATA connector on the back from
>> MLDX (using
>> the Keyer). Don't see anything in the manual about using a microHam to
>> control PTT.
>> Anyone know/use a microHam to do this?
>
> The microHAM interface expects RTS to control PTT and DTR to generate
> the CW.
>
> I use the audio vox built into the SignaLink SL1 to key the PTT when
> transmitting from cocoaModem.
>
> <http://www.tigertronics.com/sl+main.htm>
>
>
>
> 73 Don Agro VE3VRW
>
> D o g P a r k S o f t w a r e L t d .
>
> email: dagro at dogparksoftware.com
> www: http://www.dogparksoftware.com
> iChat AV:dogpark at mac.com
>
--
God gives every bird his worm, but he does not throw it into the nest.
-Swedish proverb
More information about the DogParkList
mailing list